The increased leather shoes will be more prone to mildew in wet weather. What is the way to prevent the inner shoes from being mildewed and effective? Leather shoes are made from the first layer of cowhide/calfskin and are made of other synthetic materials. Because the cortex has fat and protein, it attracts mold to propagate on it, making the Height Shoes easy to mold. Therefore, to prevent the increase in the internal mildew of the leather shoes, it is necessary to start from the leather characteristics of the shoes.
Preventing Height Shoes 6.0 cm moldy, leather shoes should be less soaked in water, more oil, and always keep clean and dry. When the shoes are not worn, clean them in time. After wearing the shoes, use a cloth cloth or soft hair to wipe off the dust. The gap between the heel and the shoe body can be removed with a pointed brush. When you clean your shoes, apply some toothpaste or a few drops of vinegar and wipe it with the shoe polish to increase the brightness of the leather surface. After storage for a period of time, take out the ventilation and re-clean it to prevent mildew.
Prevent the mildew of the Height Increasing Shoes, and the bottom of the shoes should be sorted in time. In the finishing of the inner sole of the leather shoes, the soil is first removed and oiled to maintain the softness of the outsole. The method of properly storing the shoes can prevent the mildew of the shoes. Also, before storing, apply lard (also can be rubbed with pork) or vegetable oil to protect the leather surface from wrinkles. At the same time, the old newspaper with the shredded scorpion was stuffed into the shoes to prevent deformation. Do not polish after the shoe polish is rubbed, put the newspaper in the shoe, then put it into the shoe box, put 2 pieces of anti-mildew tablets in the box and put it in a dry environment. If it is rainy and humid in summer, use a plastic bag to seal the collection. Do not expose it to the sun or blow it with a blower. Otherwise, it may easily cause the shoe to deform, the surface of the leather to be hard or the surface coating to break off. Regularly care for and maintain the shoes, so that the inner shoes are kept bright and moist.
If you continue to mold, it may be that the place where you collect leather Height Increasing Shoes is too humid. So pay attention to the location of the collection is relatively dry. During the storage process, sometimes white, blue-green, yellow-brown or taupe cream appears on the surface. This cream may be oil cream, salt cream, or mildew cream. Mildew cream is also mildew. Spots, these are the reason why the shoes are moldy. How do you deal with the mildew of leather shoes?
Oil cream is mostly white powdery oil exudate, because the animal skin itself, the high solubility point stearic acid lipids are not removed, or in the leather processing process, excessive amounts of lipids are added. Things. These materials tend to ooze out of the leather surface and form oil cream during the storage of leather Elevator Shoes, purses and their products, especially in cold weather conditions.
The way in which the oil cream makes the Elevator Shoes moldy is that the place where the shoes are mildewed by hand will melt the oil cream on the shoes. Salt creams are soluble salts that are used or produced during the manufacture of leather. They are not sufficiently washed away before drying and remain in the leather. When the leather shoes are dry or placed, a layer of grayish white frost oozes from the surface.
Salt cream makes shoes mildew treatment, generally can be wiped with a damp cloth, salt cream is easy to wipe, but will soon appear. Mildew is due to the storage of shoes, bags and their products containing oil and grease in a humid and unventilated place. In the case of high air humidity and high temperature, mold spores are infected to cause mold growth, and a blue-green or gray-white or yellow-brown frost formed on the surface of the leather may also be a velvet.